Many customers who need to purchase automatic fire monitor fire extinguishing system will generally consult the layout requirements of automatic fire monitors, because if they know the layout requirements in advance, they can avoid it during the installation and wiring process.

　　In this way, there will be no problem with the acceptance directly. So, what are the requirements for the layout of automatic fire monitors? Today, JunXunPu brand fire water monitor manufacturers will summarize and analyze.

　　The first is the requirement for the number of arrangements. According to relevant regulations, the number of indoor fire fighting water monitors should not be less than two. That is to say, if a fire occurs within the same protection area, at least two automatic fire water monitors are required.

　　The gun can reach the fire source at the same time. The advantage of this requirement is that the fire can be extinguished in a short time and the loss is reduced to very small. This is why you see that in some water spray videos, one fire point appears more The picture of the water cannons working at the same time.

　　Second is the requirement for installation height. Although there is no regulation that clearly states how many meters the fire water monitor fire extinguishing system must be installed at, but in the acceptance specification, it is mentioned that it needs to be consistent with the situation at the time of inspection. For example, the installation height of the water cannon products of the Junxunpu brand is 6 - 22 meters, because the installation height when submitted for inspection is also 6 - 22 meters, so the precautions about the installation height are specially reminded.

　　Finally, there is the requirement of water spray accuracy. Many customers can understand this. If the spray test is inaccurate or always missed and the distance is short, it is naturally not acceptable. Yes, then the acceptance will not be passed, so after the installation is completed, an on-site sprinkler test is needed. If the fire is inaccurate, you need to debug or find the manufacturer's technology to solve the related problems.